Yes-1000cp Concrete Pipe Compression Testing Machine

• Customization: Available
• After-sales Service: Lifetime
• Warranty: 1 Year
• Model NO.: YAW-1000CP
• Max Diameter of Workpiece: 3000mm
• Mass Scope of Workpiece: <900kg
• Type: Compression Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Mechanical Load
• Loading Method: Static Load
• Display: PC
• Control: Computer Control
• Weight: 1000-2000Kg
• Power Source: AC220V
• Oil Cylinder Position: Motor Control
• Upper Support Beam: 3000mm
• Piston Stroke: 0-500mm
• Transport Package: Exported Package
• Specification: 2800Kg
• Trademark: Chengyu
• Origin: China
• HS Code: 9024109000
• Production Capacity: 1000

Product Description

                        1000KN YES-1000CP Concrete Pipe Compression Testing Machine

Product Description

1. Introduction:
The testing device for concrete and reinforced concrete drainage pipes is in accordance with the national standards "Concrete and Reinforced Concrete Drainage Pipes" (GB/T 11836-1999, GB/T 11836-2009) and "Test Methods for Concrete and Reinforced Concrete Drainage Pipes" (GB/T 16752-2006, GB/T 16752-2010), using a three-point compression mode, mainly suitable for external pressure testing of concrete and reinforced concrete drainage pipes.
2.Features:
2.1 The cross beam adopts electric lifting to facilitate testing of drainage pipes of different diameters (300-2100mm).
2.2 The lower support adopts an integral type to improve the rigidity of the testing machine.
2.3 The machine base is cast in concrete and is flush with the ground. It can also be fixed with expansion bolts.
2.4 The loading adopts microcomputer-controlled hydraulic loading, which saves time and effort, makes the loading stable, and the test space can be reset quickly.
2.5 It meets the loading speed and pressure holding control time requirements at each level specified by the national standard, and the load control level can be specified by customer programming.
2.6 The force value is directly displayed in KN value, eliminating the trouble of force value calculation.
2.7 The software is equipped with peak hold function, automatic data storage, report editing and printing and other functions.
2.8 The report can save and print information such as force values, so that the test process can be truly reproduced.
2.9 There are no limit protections for the strokes of the beam and the piston. Pay attention to the safety during the test.
2.10 High rigidity frame design reduces interference factors on test results.
The 2.11 software is equipped with an automatic force value clearing system and supports data uploading and can also be displayed on a computer.
2.12 The area, height, ambient temperature and other parameters of each group of tests can be changed or filled in according to the actual situation.
2.13 System control is easy to use. It can also be used for compression experiments on other hollow bricks and concrete structural parts.
2.14 For details on the operation of the software, please refer to the software manual.
3.Main Parameters:
1) Maximum pressure: 1000KN
2) Column spacing: 2000mm
3) Test space: 2400×3100mm
4) Cross beam adjustment method: electric winch
5) Cross beam adjustment range 300mm~22100mm
6) Cross beam moving speed: 100mm/min
7) Force value accuracy: Level 1 (better than ±1% of the indicated value)
8) Test force display mode: real-time display of current holding time, speed, force value, and other parameters.
9) The force measurement system has computer display function, loading speed, force value-time curve display, automatic storage, query at any time, report printing, test process saving and other functions.
10) Crack loads are identified and recorded.
11) The percentage of reaching the national standard is automatically calculated and the data is issued.
12) It has an overload protection function, that is, an automatic shutdown function of 3% when the force value exceeds the full range.
13) Piston stroke: 0-500mm
14) Upper support beam: 3000mm
15) Hardwood support length: 2000mm
16) Hardwood support spacing: adjustable (spiral type, easy to adjust)
17) Hardwood support fillet: R=12.5mm
18) Loading method: electro-hydraulic.
19) Load control mode: automatic
20) Power supply: 220V±10%.
21) Overall machine weight: 2800Kg
4.Working conditions:
1) Room temperature is within the range of 10ºC-35ºC; relative humidity is not greater than 80%;
2) In a clean environment without vibration, corrosive media and strong electromagnetic field interference;
3) The fluctuation range of the power supply voltage should be within ±10% of the rated voltage;
4) Install correctly on a solid foundation.

 

Company Profile

FAQ

1. Are you a manufacturer?
Yes, we are one of the largest manufacturer of every kinds of testing machines in China. In general, every machine shipped from our factory provides 12 months of free maintenance, taking into account shipping reasons. We can extend the maintenance period for our customers for 2 months.
2. Do you have after-sales service? How can I ask? What about warranty?
Before the delivery of the equipment, we will carry out the factory inspection and the equipment will be shipped after the inspection. If your machine does not work properly, you can contact us and we will try our best to communicate with you via email or skype video chat. We promise we will reply to you within 24 hours and with 3 Within a working day to provide solutions. After confirming that it is really necessary, we can send you new parts or on-site maintenance.
The service does not include mechanical failure due to the following reasons:
(1) Wrong operation;
(2) Privately modified;
(3) Failure caused by non-equipment itself
(4) Use environment that is not suitable for equipment operation. Such as high temperature, humidity, corrosive gas or vibration.
(5) Problems caused by movement or transportation.
(6) Consumable components.
(7) Natural disasters
3. What is the delivery deadline?
Most of the time, we have inventory at the factory. If not, the delivery time is usually 15 to 20 days after receiving the payment. If you need it urgently, we can consider making special arrangements for you.
4. What kind of packaging and transportation do you use?
Under normal circumstances, we will use ordinary orders such as DHL, Fedex, UPS TNT transport. Large orders will use aviation or shipping.
5. Can the device be customized? Can I customize my own design on the device?
We can not only provide standard machines, but we can also provide customized machines according to your needs.
At the same time, we can also place your trademark on the machine.
6. What kind of packaging do you use?
Plastic sealed and sturdy wooden box.
7. What payment methods do you support?
Paypal, T/T, Western Union,L/C