| Customization: | Available |
|---|---|
| After-sales Service: | Lifetime |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.CYLSN-1000E Introduction
1.1 Application:The detector is based on GB/T 2611-2007 "General Technical Requirements for Testing Machines", JB/T 9370-2015 "Technical Conditions for Torsional Testing Machines", JJG 139-2014 "Testing Machine Verification Regulations" and other commonly used national and industry testing machine standards . At the same time, refer to GB/T1231-2006 "Technical Conditions for Large Hexagon Bolts and Large Hexagon Nuts for Steel Structures", GB/T16823.1-2010 "Fastener Torque-Clamping Force Test", GB50205-2001 "Construction Quality of Steel Structure Engineering" "Acceptance Specification", GB/T 32076.2-2015 "Preload High Strength Bolted Structural Connection Pair", EN 14399.2-2005 "Preload High Strength Structural Bolt Assemblies. Part 2: Preload Suitability Test", ASTM A325M-2009 "Standard Specification for Heat Treated Steel Structural Bolts with Heat Treated Minimum Tensile Strength of 830Mpa", ASTM F3215/F3125M-15a "Heat Treated Minimum Tensile Strength of 120 ksi (830 MPa) and 150 ksi (1040 MPa) Standard Specification for Steel and Alloy Steel High Strength Structural Bolts with Inch and Metric Dimensions "AS/NZS1252:1996 "High Strength Bolts for Construction (Bolts with Nuts & Washers)" NB/T31082-2016 "Wind Turbine Towers It can be designed and manufactured according to relevant requirements such as High-strength Bolt Connection Pairs for Racks. It can detect, display and print the axial force, torque and torque coefficient of hexagonal head and double-head high-strength bolt connection pairs. When the axial force reaches the value specified in the standard, the detector will beep and record the peak value of the detection data. After the equipment stays for 1 second, it will automatically reverse and loosen the sample. At the same time, the detector will automatically calculate the torque according to the detected axial force and torque. The coefficient is automatically displayed; when a group of tests is completed, the detector automatically calculates the average axial force, average torque, average torque coefficient, standard deviation and coefficient of variation of N specimens;
1.2 Technical parameters and control methods:
1.2.1 Voltage: control system 220V AC; motor AC 380V
1.2.2 Total motor power: 5.0KW
1.2.3 Output speed: 0.1-4r/min
1.2.4 Axial force detection range: 100-1000kN
1.2.5 Torque detection range: 100-5000Nm
1.2.6 Large hexagon bolt specifications: M10\M12\M16\M20\M24\M27\M30\M36\M39
1.2.7 Bolt length: 30mm---350mm (≥2.5d)
1.2.8 Test accuracy: axial force ±1.0% torque ±1.0%
1.2.9 Torsion angle measurement range 0-1000° (unlimited)
1.2.10 Relative error of indication value of torsion angle ±1%
1.2.11 Relative error of torsion speed Within ±1.0% of the set value
1.2.12 Weight: about 2000kg
1.2.13 Customized measurement and control system*1(meet EN14399-2:2005(E) standard)
1.3 Control method:
1.3.1 The equipment can be controlled by any method such as setting the axial force, setting the torque, and setting the angle of rotation.
1.3.2 It has the function of setting initial torque→first target angle→second target angle, and then testing the torque value and axial force value under each target.
| No. | Items | Unit | Qty. |
| 1 | Test host (including high-precision 1000kN axial force sensor and 5000NM torque sensor) | set | 1 |
| 2 | 3.0KW imported servo motor kimono drive system | set | 1 |
| 3 | Microcomputer-controlled high-strength bolt test special controller | set | 1 |
| 4 | Lenovo computer mainframe and LCD monitor | set | 1 |
| 5 | Nut sleeve | set | 1(total 10 pieces) |
| 6 | Bolt outer plate or outer plate M10\M12\M16\M20\M22\M24\M27\M30\M36\ M39 | set | 1(total 10 pieces) |
| 7 | Bolt inner baffle M10\M12\M16\M20\M22\M24\M27\M30\M36\ M39 | set | 1(total 10 pieces) |
| 8 | Anti-rotation board M10\M12\M16\M20\M22\M24\M27\M30\M36\ M39 | set | 1(total 10 pieces) |
| 9 | Front and rear automatic adjustment device of mobile base (including motor, reducer and high-precision ball screw) | set | 1 |
| 10 | Full protection safety push-pull metal shield (this is optional) | set | 1 |
1.Are your company a trading one or a factory?Factory. OEM is also acceptable for us.
2.How to choose the most suitable products?
Our professional team will give you the best suggestion after confirming what kind of test machine you need to do and the required specification.
3.What's the delivery term?
Normally, we have stock in the factory. If there is no stock, the delivery will be within 15-20 working days after your deposit receipt. If you are in urgent need, we can consider making special arrangement for you.
4.Can we visit your factory before order?
Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to arrange hotel and pick up you from airport.
5.Do you have customers of our country before?
Now our testing machines have been sold to more than 26 countries, like USA, Canada, Russia, UK, Italy, Germany, European Union, India, Pakistan, Philippines, Singapore, Thailand and Vietnam, Iran, Brazil and so on.
6.How about your warranty?
Generally, our warranty is one year. Within the warranty period, we can offer technique support and part parts change, necessarily, our engineers may go to your place for better service.
){kind=link}