YAW-600HB Microcomputer Control Electro-hydraulic Servo Compression Testing Machine
Product Description
I. Equipment Overview
This testing machine employs hydraulic power source drive, electro-hydraulic servo control technology, and computer data acquisition and processing to achieve closed-loop control and automatic detection as a high-precision material testing device. It consists of four components: the main testing unit, oil source (hydraulic power source), measurement and control system, and testing accessories. The maximum test force is 600 kN, with an accuracy class exceeding Grade 1.
Primarily used for determining the compressive strength of masonry bricks such as sintered common bricks, sintered perforated bricks (blocks), sintered hollow bricks (blocks), as well as concrete blocks and concrete perforated (hollow) bricks, this testing machine features dynamic display and real-time control of load, time, and test curves, along with maximum load hold capability.
This testing machine and its accessories comply with standards including GB/T2542-2012 and GB/T4111-2013.
Product Parameters
II. Technical Specifications
1. Maximum Test Force (kN): 600
2. Test Force Measurement Range (kN): 2%-100% FS
3. Relative Error of Test Force Indication: ≤ ±0.5% of indicated value
4. Test Force Resolution (kN): 0.01
5. Net Column Spacing (mm): 290
6. Piston Diameter (mm): 170
7. Compression Piston Stroke (mm): 100
8. Compression Chamber (mm): 220
9. Upper Platen Dimensions (mm): 250
10. Lower Platen Dimensions (mm): 290×290
11. Load Application Speed Error (Max.): ±5%
12. Controllable loading speed range (kN/s): 0.01~10 adjustable
13. Motor power (kW): 0.75
14. Input power supply: AC380V±10V/50Hz
15. Main Unit Dimensions (mm): 1160 × 520 × 1430
16. Total Weight (kg): 650
Note: Product specifications are subject to change. Actual product specifications shall prevail.
III. Operating Conditions
1. Within a temperature range of -10 to 40°C (14 to 104°F).
2. In a vibration-free environment.
3. In an environment free from corrosive media and magnetic field interference.
4. Power supply voltage fluctuations must not exceed 10% of the rated voltage.
IV. Installation and Commissioning
1. Hydraulic Line Connection
First, fill with hydraulic oil suitable for the ambient temperature (use 46-grade anti-wear hydraulic oil at room temperatures below 30°C, and 68-grade anti-wear hydraulic oil at room temperatures of 30°C or above). Connect the main unit to the control cabinet using the supplied rubber hose. Route the overflow line into the control cabinet's oil tank. Safely store the oil plugs removed from the hose fittings to prevent loss, which could hinder future relocation of the machine. Ensure all connections are tight and insert sealing gaskets.
2. Electrical Connection
Connect the power supply strictly according to the markings on the supplied power cord.
After installing the computer, connect one end of the supplied Ethernet cable to the controller's communication port and the other end to the computer's communication port. Remove the entire data cable assembly from the main unit and connect it to the corresponding ports on the rear panel of the control cabinet according to the cable markings.
V. Routine Maintenance
1. Before each startup, inspect all hydraulic components (hoses, control valves, oil tank, etc.) for oil leaks, check for loose bolts, and ensure electrical components are in good working order.
2. Before startup and during operation, carefully inspect and operate according to each step in the procedure. Violations of operating procedures are strictly prohibited.
3. Regularly check the oil level in the tank using the dipstick as a reference.
4. Keep both the interior and exterior of the testing machine clean to prevent component corrosion.
5. Regularly inspect the cleanliness of the hydraulic fluid. For frequent users, disassemble and clean the filter monthly. Replace the filter if severely clogged with contaminants or damaged.
6. When used frequently, replace the oil every six months. Thoroughly clean the oil tank, oil filter, and filter screen with kerosene, repeating the process several times until clean. Wipe the tank bottom dry with a towel before refilling with clean oil. If the oil appears severely cloudy and unusable during regular operation, replace it immediately.
7. During testing, do not touch the equipment or any connecting cables to avoid affecting data accuracy.
8. This equipment is precision measuring apparatus. Unauthorized personnel without proper training are strictly prohibited from operating it.
9. After testing, if the equipment will remain unused for an extended period, turn off the main power supply.
Company Profile
FAQ
1. Are you a manufacturer?
Yes, we are one of the largest manufacturer of every kinds of testing machines in China. In general, every machine shipped from our factory provides 12 months of free maintenance, taking into account shipping reasons. We can extend the maintenance period for our customers for 2 months.
2. Do you have after-sales service? How can I ask? What about warranty?
Before the delivery of the equipment, we will carry out the factory inspection and the equipment will be shipped after the inspection. If your machine does not work properly, you can contact us and we will try our best to communicate with you via email or skype video chat. We promise we will reply to you within 24 hours and with 3 Within a working day to provide solutions. After confirming that it is really necessary, we can send you new parts or on-site maintenance.
The service does not include mechanical failure due to the following reasons:
(1) Wrong operation;
(2) Privately modified;
(3) Failure caused by non-equipment itself
(4) Use environment that is not suitable for equipment operation. Such as high temperature, humidity, corrosive gas or vibration.
(5) Problems caused by movement or transportation.
(6) Consumable components.
(7) Natural disasters
3. What is the delivery deadline?
Most of the time, we have inventory at the factory. If not, the delivery time is usually 15 to 20 days after receiving the payment. If you need it urgently, we can consider making special arrangements for you.
4. What kind of packaging and transportation do you use?
Under normal circumstances, we will use ordinary orders such as DHL, Fedex, UPS TNT transport. Large orders will use aviation or shipping.
5. Can the device be customized? Can I customize my own design on the device?
We can not only provide standard machines, but we can also provide customized machines according to your needs.
At the same time, we can also place your trademark on the machine.
6. What kind of packaging do you use?
Plastic sealed and sturdy wooden box.
7. What payment methods do you support?
Paypal, T/T, Western Union,L/C
Audited Supplier 
){kind=link}